Effects of Splitter Blade Length on Disc Pump Performance
No hay miniatura disponible
Fecha
2017
Autores
Martinez-Diaz, Leonel
Hernandez Herrera, Hernan
Castellanos-Gonzalez, Luis Marcos
Silva Ortega, Jorge Ivan
Título de la revista
ISSN de la revista
Título del volumen
Editor
Scientific Research publishing company
Resumen
The disc pump operates using boundary layer principle and viscous drag with a relatively low efficiency. There are methods to increase head and efficiency, one of them is the placing of blades sector sor splitter blades in disc. This method has been applied only in the low viscosity fluids pumping (v<0.1 stokes). This study describe an experimental rescarch in a hight viscosity fluid (v=2 stokes) with exit angle β2 = 35° and different splitter blades Lengths (Ls) (75, 50, 25%). The prupose is to determinate the splitter blades length that achieves the most effective combination between the blade effect and boundary layer effect in order to increase the energy transmission efficiency from the impeller to the fluid. As result, it can be established that the use of spliter blades is an alternative to increase the performance of the fluid. As result, it can be established that the use of spliter blades is an alternative to increase the performance of the disc pump. The highest efficiency and head were obtained for the gapsize between two disc (b) of 12 mm using a 50% spliter blades length of the man blade length.
Descripción
Palabras clave
Pump, Disc pump, Spliter blades, Boundary layer, Viscous drag, Blades lenghts