Mostrar el registro sencillo del ítem

dc.contributor.authorHernandez-Herrera, Hernan
dc.contributor.authorSilva-Ortega, Jorge I.
dc.contributor.authorMartínez Diaz, Vicente Leonel
dc.contributor.authorGarcía Sanchez, Zaid
dc.contributor.authorGonzález García, Gilberto
dc.contributor.authorEscorcia, Sandra M.
dc.contributor.authorZarate, Habid E.
dc.date.accessioned2020-03-19T21:11:25Z
dc.date.available2020-03-19T21:11:25Z
dc.date.issued2020
dc.identifier.issn21464553
dc.identifier.urihttps://hdl.handle.net/20.500.12442/5039
dc.description.abstractCompressed air is one of the most widely used application energies in the industry, such as good transportability, safety, purity, cleanliness, storage capacity and ease of use. In many countries, compressed air systems account for approximately 10% of the industry’s total electricity consumption. Despite all its advantages, compressed air is expensive, only between 10% and 30% of the energy consumed reaches the point of final use. Energy is lost as heat, leaks, pressure drop, misuse, among others. Energy efficiency measures such as: reducing compressor pressure, lowering air inlet temperature, adequate storage capacity, recovering residual heat from the air compressor and reducing leakage, can produce energy savings between 20% and 60%, with an average return on investment lower than 2 years. This paper analyzes the main energy efficiency measures that can be applied in the CASs, the potential energy savings, implementation costs and return rate of each of them are being calculated giving a necessary tool for companies in their objectives to reduce greenhouse gas emissions and energy consumption.eng
dc.format.mimetypepdfspa
dc.language.isoengeng
dc.publisherEconJournalseng
dc.rightsAttribution-NonCommercial-NoDerivatives 4.0 Internacional
dc.rights.urihttp://creativecommons.org/licenses/by-nc-nd/4.0/
dc.sourceInternational Journal of Energy Economics and Policyeng
dc.sourceVol. 10, No. 3 (2020)spa
dc.subjectCompressed Air Systemseng
dc.subjectElectricity Consumptioneng
dc.subjectEnergy Efficiencyeng
dc.subjectEnergy Savingseng
dc.titleEnergy savings measures in compressed air systemseng
dc.typearticleeng
dcterms.referencesAbdelaziz, E.A., Saidur, R., Mekhilef, S. (2011), A review on energy saving strategies in industrial sector. Renewable and Sustainable Energy Reviews, 15(1), 150-168.eng
dcterms.referencesAir Compressor Service. (2010), Compressed Air System Guide Designing Your Compressed Air System Provided as a Service by Kaeser Compressors, Inc., 2010. Available from: http://www. kaeser.com.co.eng
dcterms.referencesAnderson, E., Arfwidsson, O., Thollander, P. (2018), Benchmarking energy performance of industrial small and medium-sized enterprises using an energy efficiency index: Results based on an energy audit policy program. Journal of Cleaner Production, 182, 883-895eng
dcterms.referencesAngarita, E.N., Eras, J.J.C., Herrera, H.H., Santos, V.S., Morejón, M.B., Ortega, J.I.S., Gutiérrez, A.S. (2019), Energy planning and management during battery manufacturing. Gestão and Produção, 26(4), e3928.eng
dcterms.referencesAnglani, N., Mura, P. (2010), Opportunità di Ottimizzazione dei Consumi Nella Produzione, Distribuzione, Utilizzo Dell’aria Compressa nei Settori Industriali Più Sensi. Report RdS, No. 222.eng
dcterms.referencesBenedetti, M., Bertini, I., Introna, V., Ubertini, S. (2018), Explorative study on compressed air systems’ energy efficiency in production and use: First steps towards the creation of a benchmarking system for large and energy-intensive industrial firms. Applied Energy, 227, 436-448eng
dcterms.referencesBonacina, F., Corsini, A., De Propris, L., Marchegiani, A., Mori, F. (2015), Industrial energy management systems in Italy: State of the art and perspective. Energy Procedia, 82, 562-569.eng
dcterms.referencesBonfàa, F., Salvatorib, S., Benedettic, M., Intronad, V., Ubertinie, S. (2017), Monitoring compressed air systems energy performance in industrial production: Lesson learned from an explorative study in large and energy-intensive industrial firms. Energy Procedia, 143, 396-403.eng
dcterms.referencesBose, J.R., Olson, M.K. (1993), TAPS’s leak detection seeks greater precision. Oil and Gas Journal, 91(14), 14.eng
dcterms.referencesBroniszewski, M., Werle, S. (2018), The Study on the Heat Recovery from Air Compressors. In: E3S Web of Conferences, No. 70, 03001 EDP Sciences.eng
dcterms.referencesCastellanos, L.M., Hernández-Herrera, H., Silva-Ortega, J.I., Martínez Diaz, V.L., García Sanchez, Z. (2019), Potential energy savings and Co2 emissions reduction in Colombia compressed air systems. International Journal of Energy Economics and Policy, 9(6), 71-79.eng
dcterms.referencesCloete, S., le Roux, D., Buhrmann, T. (2013), Reducing Compressed Air Wastage by Installing New Technology in Underground Mines. South Africa: 2013 Proceedings of the Conference on the Industrial and Commercial Use of Energy, ICUE.eng
dcterms.referencesCorrea, J., Borroto, A., González, R., Curbelo, M., Díaz, A.M. (2014), Diseño y aplicación de un procedimiento para la planificación energética según la NC-ISO 50001: 2011. Ingeniería Energética, 35(1), 38-47.eng
dcterms.referencesCorsini, A., De Propris, L., Feudo, S., Stefanato, M. (2015), Assessment of a diagnostic procedure for the monitoring and control of industrial processes. Energy Procedia, 75, 1772-1778.eng
dcterms.referencesDindorf, R. (2012), Estimating potential energy savings in compressed air systems. Procedia Engineering, 39, 204-211.eng
dcterms.referencesDoE, U.S. (1998), Improving Compressed Air System Performance, a Sourcebook for Industry. Washington, DC: Prepared for the US Department of Energy, Motor Challenge Program by Lawrence Berkeley National Laboratory (LBNL) and Resource Dynamics Corporation (RDC).eng
dcterms.referencesdos Santos Mascarenhas, J., Chowdhury, H., Thirugnanasambandam, M., Chowdhury, T., Saidur, R. (2019), Energy, exergy, sustainability, and emission analysis of industrial air compressors. Journal of Cleaner Production, 231, 183-195.eng
dcterms.referencesDudić, S., Ignjatović, I., Šešlija, D., Blagojević, V., Stojiljković, M. (2012), Leakage quantification of compressed air using ultrasound and infrared thermography. Measurement, 45(7), 1689-1694.eng
dcterms.referencesEras, J.J.C., Gutiérrez, A.S., Santos, V.S., Herrera, H.H., Morejón, M.B., Ortega, J.S., Vandecasteele, C. (2019), Energy management in the formation of light, starter, and ignition lead-acid batteries. Energy Efficiency, 12(5), 1219-1236.eng
dcterms.referencesEuropean Commission. (2009), Reference Document on Best Available Techniques for Energy Efficiency. Available from: http://www. eippcb.jrc.ec.europa.eu.eng
dcterms.referencesFestel, G., Würmseher, M. (2014), Benchmarking of energy and utility infrastructures in industrial parks. Journal of Cleaner Production, 70, 15-26.eng
dcterms.referencesFleiter, T., Hirzel, S., Worrell, E. (2012), The characteristics of energyefficiency measures a neglected dimension. Energy Policy, 51, 502-513.eng
dcterms.referencesGoldstein, D., Almaguer, J.A. (2013), Developing a Suite of Energy Performance Indicators (EnPIs) to Optimize Outcomes. Washington, DC: Proceedings of the 2013 ACEEE Summer Study on Energy Efficiency in Industry, American Council for an Energy-Efficient Economy.eng
dcterms.referencesGoodarzia, G., Dehghani, S., Akbarzadeh, A., Date, A. (2017), Energy saving opportunities in air drying process in high-pressure compressors. Energy Procedia, 110, 428-433.eng
dcterms.referencesGopalakrishnan, B., Ramamoorthy, K., Crowe, E., Chaudhari, S., Latif, H. (2014), A structured approach for facilitating the implementation of ISO 50001 standard in the manufacturing sector. Sustainable Energy Technologies and Assessments, 7, 154-165.eng
dcterms.referencesHuang, B., Jian, Q., Luo, L., Zhao, J. (2017), Experimental study of enhancing heating performance of the air-source heat pump by using a novel heat recovery device designed for reusing the energy of the compressor shell. Energy Conversion and Management, 138, 38-44.eng
dcterms.referencesISO. 50001. (2011), Energy Management Systems--Requirements with Guidance for Use. United Kingdom: International Organization for Standardization.eng
dcterms.referencesKanneganti, H., Gopalakrishnan, B., Crowe, E., Al-Shebeeb, O., Yelamanchi, T., Nimbarte, A., Abolhassani, A. (2017), Specification of energy assessment methodologies to satisfy ISO 50001 energy management standard. Sustainable Energy Technologies and Assessments, 23, 121-135.eng
dcterms.referencesKaya, D., Phelan, P., Chau, D., Ibrahim, S.H. (2002), Energy conservation in compressed air systems. International Journal of Energy Research, 26(9), 837-849.eng
dcterms.referencesKluczek, A., Olszewski, P. (2017), Energy audits in industrial processes. Journal of Cleaner Production, 142, 3437-3453.eng
dcterms.referencesKriel, C.J.R., Marais, J.H., Kleingeld, M., (2014), Modernising Underground Compressed Air DSM Projects to Reduce Operating Costs. South Africa: 2014 Proceedings of the Conference on the Industrial and Commercial Use of Energy, ICUE.eng
dcterms.referencesMadrigal, J.A., Eras, J.J.C., Herrera, H.H., Santos, V.S., Morejón, M.B. (2018), Planificación energética para el ahorro de fueloil en una lavandería industrial. Ingeniare. Revista Chilena de Ingeniería, 26(1), 86-96.spa
dcterms.referencesMousavi, S., Kara, S., Kornfeld, B. (2014), Energy efficiency of compressed air systems. Procedia Cirp, 15, 313-318.eng
dcterms.referencesMurvay, P.S., Silea, I. (2012), A survey on gas leak detection and localization techniques. Journal of Loss Prevention in the Process Industries, 25(6), 966-973.eng
dcterms.referencesNeale, J.R., Kamp, P.J.J. (2009), Compressed air system best practice programmes: What needs to change to secure long term energy savings for New Zealand. Energy Policy, 37, 3400-3408eng
dcterms.referencesNethler, T. (2018a), Linking energy efficiency measures in industrial compressed air systems with non-energy benefits-a review. Renewable and Sustainable Energy Reviews, 89, 72-87.eng
dcterms.referencesNethler, T., Parra, R., Thollander, P. (2018), Implementation of energy efficiency measures in compressed air systems: Barriers, drivers and non-energy benefits. Energy Efficiency, 11(5), 1281-1302.eng
dcterms.referencesOlszewski, P., Borgnakke, C. (2016), Influence of volumetric capacity on energy consumption in oil-lubricated compressed air systems. Journal of Thermal Science and Engineering Applications, 8(4), 10.eng
dcterms.referencesPaffel, K. (2017), Air system leak. Hydrualics and Pneumatics, 70(11), 22-27.eng
dcterms.referencesRadgen, P., Annegret, C. (2003), Efficient Compressed Air a Successful Campaign for Energy Efficient Compressed Air Systems in Germany. Saint-Raphaël, France: ECEEE 2003 Summer Study Proceedings.eng
dcterms.referencesRadgen, P., Blaustein, E. (2001), Compressed air Systems in the European Union: Energy, Emissions, Savings Potential and Policy Actions. Stuttgart: LOG_X.eng
dcterms.referencesReddy, H.P., Narasimhan, S., Bhallamudi, S.M., Bairagi, S. (2011), Leak detection in gas pipeline networks using an efficient state estimator. Part-I: Theory and simulations. Computer Chemical Engineering, 35(4), 651-661.eng
dcterms.referencesReddy, H.P., Narasimhan, S., Bhallamudi, S.M., Bairagi, S. (2011a), Leak detection in gas pipeline networks using an efficient state estimator. Part II. Experimental and field evaluation. Computer Chemical Engineering, 35(4), 662-670.eng
dcterms.referencesSaidur, R., Rahim, N.A., Hasanuzzaman, M. (2010), A review on compressed-air energy use and energy savings. Renewable and Sustainable Energy Reviews, 14(4), 1135-1153.eng
dcterms.referencesSarduy, J.R., Felipe, P., Torres, Y., Plascencia, M., Santos, V., Haeseldonckx, D. (2018), A new energy performance indicator for energy management system of a wheat mill plant. International Journal of Energy Economics and Policy, 8(4), 324-330.eng
dcterms.referencesSchulze, M., Nehler, H., Ottosson, M., Thollander, P. (2016), Energy management in industry a systematic review of previous findings and an integrative conceptual framework. Journal of Cleaner Production, 112, 3692-3708.eng
dcterms.referencesŠešlija, D., Ignjatović, I., Dudić, S., Lagod, B. (2011), Potential energy savings in compressed air systems in Serbia. African Journal of Business Management, 5(14), 5637-5645.eng
dcterms.referencesShaw, W., Mathews, M., Marais, J. (2019), Using specific energy as a metric to characterise compressor system performance. Energy Technologies and Assessments, 31, 329-338.eng
dcterms.referencesShim, H.S., Lee, S.J. (2018), A Study of Determination of Energy Performance Indicator for Applying Energy Management System in Industrial Sector. USA: 2018 Portland: International Conference on Management of Engineering and Technology (PICMET), IEEE. p1-6.eng
dcterms.referencesTaheri, K., Gadow, R. (2017), Industrial compressed air system analysis: Exergy and thermoeconomic analysis. CIRP Journal of Manufacturing Science and Technology, 18, 10-17eng
dcterms.referencesUPME Corpoema. (2014), Determinación y Priorización de Alternativas de Eficiencia Energética Para los Subsectores Manufactureros Informe Final Códigos CIIU 19 a 31. Vol. I. Colombia. Available from: http://www.upme. gov.co/estudios/2014/informe_final_ volumen_1.pdf. [Last accessed on 2019 Sep 12].eng
dcterms.referencesUPME Corpoema. (2014a), Determinación y Priorización de Alternativas de Eficiencia Energética Para los Subsectores Manufactureros Informe Final Códigos CIIU 19 a 31. Vol. II. Colombia. Available from: http:// www1.upme.gov.co/demandaenergetica/determinacioneficiencia/ informe_final_volumen_2.pdf. [Last accessed on 2019 Sep 12].spa
dcterms.referencesUPME Incombustion. (2013), Determinación del Potencial de Reducción del Consumo Energético en los Subsectores Manufactureros Códigos CIIU 10 a 18 en Colombia. Available from: http://www.upme.gov. co/demandaenergetica/INFORME_III_caracterizacion_energetica_ Verpub.pdf. [Last accessed on 2019 Sep 12].eng
dcterms.referencesViholainen, J., Grönman, K., Jaatinen-Värri, A., Grönman, A., Ukkonen, P., Luoranen, M. (2015), Centrifugal compressor efficiency improvement and its environmental impact in waste water treatment. Energy Conversion and Management, 101, 336-342.eng
dcterms.referencesVittorini, D., Cipollone, R. (2016), Energy saving potential in existing industrial compressors. Energy, 102, 502-515.eng
dcterms.referencesYang, M. (2009), Air compressor efficiency in a Vietnamese enterprise. Energy Policy, 37(6), 2327-2337.eng
dcterms.referencesYin, Y., Zheng, B., Yang, C., Zhang, X. (2015), A proposed compressed air drying method using pressurized liquid desiccant and experimental verification. Applied Energy, 141, 80-89.eng
dcterms.referencesZahlan, J., Shihab, A. (2015), A multi-objective approach for determining optimal air compressor location in a manufacturing facility. Journal of Manufacturing Systems, 35, 176-190.eng
dc.rights.accessrightsinfo:eu-repo/semantics/openAccessspa
oaire.versioninfo:eu-repo/semantics/publishedVersionspa
dc.type.driverarticleeng
dc.identifier.doihttps://doi.org/10.32479/ijeep.9059


Ficheros en el ítem

Thumbnail
Thumbnail

Este ítem aparece en la(s) siguiente(s) colección(ones)

  • Artículos [1351]
    Artículos científicos evaluados por pares

Mostrar el registro sencillo del ítem

Attribution-NonCommercial-NoDerivatives 4.0 Internacional
Excepto si se señala otra cosa, la licencia del ítem se describe como Attribution-NonCommercial-NoDerivatives 4.0 Internacional