Mostrar el registro sencillo del ítem

dc.contributor.authorNoriega Angarita, Eliana
dc.contributor.authorCabello Eras, Juan José
dc.contributor.authorHernández Herrera, Hernán
dc.contributor.authorSousa Santos, Vladimir
dc.contributor.authorBalbis Morejón, Milen
dc.contributor.authorSilva Ortega, Jorge Ivan
dc.contributor.authorSagastume Gutiérrez, Alexis
dc.date.accessioned2019-10-28T20:43:45Z
dc.date.available2019-10-28T20:43:45Z
dc.date.issued2019
dc.identifier.issn18069649
dc.identifier.urihttps://hdl.handle.net/20.500.12442/4273
dc.description.abstractThe aim of this study is to improve energy performance at a battery factory in Colombia by introducing the energy management approach defined in ISO 50001. In the study, the main energy consumptions were identified in the battery formation, the compressed air system and the large electric motors. An energy review was performed in the factory using measurement equipment and statistical techniques. Different actions were proposed to improve energy performance. As a result, a 3.48% reduction in electricity consumption was achieved during the implementation of the proposed measures.eng
dc.description.abstractEl objetivo de este estudio es mejorar el rendimiento energético en una fábrica de baterías en Colombia mediante la introducción del enfoque de gestión energética definido en ISO 50001. En el estudio, los principales consumos de energía se identificaron en la formación de la batería, el sistema de aire comprimido y la gran red eléctrica motores. Se realizó una revisión energética en la fábrica utilizando equipos de medición y técnicas estadísticas. Se propusieron diferentes acciones para mejorar el rendimiento energético. Como resultado, se logró una reducción del 3,48% en el consumo de electricidad durante la implementación de las medidas propuestas.spa
dc.language.isoengeng
dc.publisherUniversidade Federal de São Carlospor
dc.rightsAttribution-NonCommercial-NoDerivatives 4.0 Internacional*
dc.rights.urihttp://creativecommons.org/licenses/by-nc-nd/4.0/*
dc.sourceRevista: Gestão & Produçãopor
dc.sourceVol. 26, N° 4 (2019)spa
dc.source.urihttp://dx.doi.org/10.1590/0104-530x3928-19eng
dc.subjectEnergy planningeng
dc.subjectEnergy efficiencyeng
dc.subjectISO 50001spa
dc.subjectPlanificación energéticaspa
dc.subjectEficiencia energéticaspa
dc.titleEnergy planning and management during battery manufacturingeng
dc.title.alternativePlanificación y gestión energética durante la fabricación de bateríaseng
dc.typearticleeng
dc.rights.accessrightsinfo:eu-repo/semantics/openAccessspa
dc.source.bibliographicCitationAbdelaziz, E. A., Saidur, R., & Mekhilef, S. (2011). A review on energy saving strategies in industrial sector. Renewable & Sustainable Energy Reviews, 15(1), 150-168. http://dx.doi.org/10.1016/j.rser.2010.09.003.eng
dc.source.bibliographicCitationAmerican National Standard Motors and Generator – ANSI. American National Standards Institute – NEMA. (2012). NEMA MG 1-2012. Virginia.eng
dc.source.bibliographicCitationAragon, C. S., Pamplona, E., & Vidal Medina, J. R. (2013). Identification of energy efficiency investments and their risk assessment. Gestão & Produção, 20(3), 525-536.eng
dc.source.bibliographicCitationBecken, S., Frampton, C., & Simmons, D. (2001). Energy consumption patterns in the accommodation sector: the New Zealand case. Ecological Economics, 39(3), 371- 386. http://dx.doi.org/10.1016/S0921-8009(01)00229-4.eng
dc.source.bibliographicCitationBohdanowicz, P., & Martinac, I. (2007). Determinants and benchmarking of resource consumption in hotels: case study of Hilton International and Scandic in Europe. Energy and Building, 39(1), 82-95. http://dx.doi. org/10.1016/j.enbuild.2006.05.005.eng
dc.source.bibliographicCitationBunse, K., Vodicka, M., Schönsleben, P., Brülhart, M., & Ernst, F. O. (2011). Integrating energy efficiency performance in production management: gap analysis between industrial needs and scientific literature. Journal of Cleaner Production, 19(6-7), 667-679. http://dx.doi. org/10.1016/j.jclepro.2010.11.011.eng
dc.source.bibliographicCitationCabello Eras, J. J., Sagastume Gutiérrez, A., García Lorenzo, D., Cogollos Martínez, J. B., Hens, L., & Vandecasteele, C. (2015). Bridging universities and industry through cleaner production activities: experiences from the Cleaner Production Center at the University of Cienfuegos, Cuba. Journal of Cleaner Production, 108, 873-882. http:// dx.doi.org/10.1016/j.jclepro.2014.11.063.eng
dc.source.bibliographicCitationCabello Eras, J. J., Sousa Santos, V., Sagastume Gutiérrez, A., Guerra Plasencia, M. Á., Haeseldonckx, D., & Vandecasteele, C. (2016). Tools to improve forecasting and control of the electricity consumption in hotels. Journal of Cleaner Production, 137, 803-812. http:// dx.doi.org/10.1016/j.jclepro.2016.07.192.eng
dc.source.bibliographicCitationCagno, E., & Trianni, A. (2014). Evaluating the barriers to specific industrial energy efficiency measures: an exploratory study in small and medium-sized enterprises. Journal of Cleaner Production, 82, 70-83. http://dx.doi. org/10.1016/j.jclepro.2014.06.057.eng
dc.source.bibliographicCitationCamioto, F. C., Rebelatto, D. A. N., & Rocha, R. T. (2015). Análise da eficiência energética nos países do BRICS: um estudo envolvendo a Análise por Envoltória de Dados. Gestão & Produção, 23(1), 192-203. http:// dx.doi.org/10.1590/0104-530X1567-13.eng
dc.source.bibliographicCitationCañizares, G., Cuevas, M., Pérez, R. A., & González, E. (2015). Diseño e integración del sistema de gestión de la energía al sistema de gestión de la calidad en la ronera central” Agustín Rodríguez Mena. Sobre los Derivados de la Caña de Azúcar, 49(1), 46-52.spa
dc.source.bibliographicCitationCastrillón, R., González, A., & Quispe, E. (2013). Mejoramiento de la eficiencia energética en la industria del cemento por proceso húmedo a través de la implementación del sistema de gestión integral de la energía. Dyna, 80(177), 115-123.spa
dc.source.bibliographicCitationCastro, F., Aparecida, D., & Teixeira, R. (2015). Análise da eficiência energética nos países do BRICS: um estudo envolvendo a Análise por Envoltória de Dados. Gestão & Produção, 23(1), 192-203.por
dc.source.bibliographicCitationChan, Y., & Kantamaneni, R. (2015). Study on energy efficiency and energy saving potential in industry and on possible policy mechanisms. London: ICF Consulting. Retrieved in 2016, August 15, from https://ec.europa. eu/energy/sites/ener/files/documents/151201 DG ENER Industrial EE study - final report_clean_stc.pdfeng
dc.source.bibliographicCitationChirindo, M., Khan, M. A., & Barendse, P. S. (2016). Considerations for nonintrusive efficiency estimation of inverter-fed induction motors. IEEE Transactions on Industrial Electronics, 63(2), 741-749. http://dx.doi. org/10.1109/TIE.2015.2477801.eng
dc.source.bibliographicCitationChristoffersen, L. B., Larsen, A., & Togeby, M. (2006). Empirical analysis of energy management in Danish industry. Journal of Cleaner Production, 14(5), 516- 526. http://dx.doi.org/10.1016/j.jclepro.2005.03.017.eng
dc.source.bibliographicCitationDeng, S. (2003). Energy and water uses and their performance explanatory indicators in hotels in Hong Kong. Energy and Building, 35(8), 775-784. http://dx.doi.org/10.1016/ S0378-7788(02)00238-4.eng
dc.source.bibliographicCitationDindorf, R. (2012). Estimating potential energy savings in compressed air systems. Procedia Engineering, 39, 204-211. http://dx.doi.org/10.1016/j.proeng.2012.07.026.eng
dc.source.bibliographicCitationDudic, R., Ignjatovic, I., Šešlija, D., Blagojević, V., & Stojiljković, M. (2012). Leakage quantification of compressed air using ultrasound and infrared thermography. Measurement, 45(7), 1689-1694. http:// dx.doi.org/10.1016/j.measurement.2012.04.019.eng
dc.source.bibliographicCitationEuropean Commission – EC. (2014). Communication from the commission to the European parliament and the council energy efficiency and its contribution to energy security and the 2030 Framework for climate and energy policy. Brussels. Retrieved in 2016, August 15, from https://ec.europa.eu/energy/sites/ener/files/ documents/2014_energy_efficiency_communication.pdfeng
dc.source.bibliographicCitationFawkes, S., Oung, K., & Thorpe, D. (2016). Best practices and case studies for industrial energy efficiency improvement: an introduction for policy makers. Copenhagen: DTU. Retrieved in 2016, August 15, from http://www.unepdtu. org/-/media/Sites/energyefficiencycentre/Publications/ C2E2 Publications/Best-Practises-for-Industrial-EE_web. ashx?la=daeng
dc.source.bibliographicCitationGiacone, E., & Mancò, S. (2012). Energy efficiency measurement in industrial processes. Energy, 38(1), 331-345. http://dx.doi.org/10.1016/j.energy.2011.11.054.eng
dc.source.bibliographicCitationGielen, D., & Taylor, P. (2009). Indicators for industrial energy efficiency in India. Energy, 34(8), 962-969. http://dx.doi.org/10.1016/j.energy.2008.11.008.eng
dc.source.bibliographicCitationHasanuzzaman, M., Rahim, N. A., Saidur, R., & Kazi, S. N. (2011). Energy savings and emissions reductions for rewinding and replacement of industrial motor. Energy, 36(1), 233-240. http://dx.doi.org/10.1016/j. energy.2010.10.046.eng
dc.source.bibliographicCitationHens, L., Cabello-Eras, J. J., Sagastume-Gutiérez, A., Garcia- Lorenzo, D., Cogollos-Martinez, J. B., & Vandecasteele, C. (2017). University-industry interaction on cleaner production: the case of the Cleaner Production Center at the University of Cienfuegos in Cuba, a country in transition. Journal of Cleaner Production, 142, 63-68. http://dx.doi.org/10.1016/j.jclepro.2015.10.105.eng
dc.source.bibliographicCitationInternational Electrotechnical Commission – IEC. (2000). IEC 60095-1: lead-acid starter batteries: part 1: general requirements and methods of test. London.eng
dc.source.bibliographicCitationInternational Organization for Standardization – ISO. (2011). ISO 50001: energy management systems: requirements with guidance for use. Geneva.eng
dc.source.bibliographicCitationInternational Organization for Standardization – ISO. (2014). ISO 50004: energy management systems: Guidance for the implementation, maintenance and improvement of an energy management system. Geneva.eng
dc.source.bibliographicCitationJung, J., Zhang, L., & Zhang, J. (2016). Lead-acid battery technologies. fundamentals, materials and applications. Florida: CRC Press.eng
dc.source.bibliographicCitationKaygusuz, K. (2012). Energy for sustainable development: a case of developing countries. Renewable & Sustainable Energy Reviews, 16(2), 1116-1126. http://dx.doi. org/10.1016/j.rser.2011.11.013.eng
dc.source.bibliographicCitationKiessling, R. (1992). Lead acid battery formation techniques. Shelton: Digatron Firing Circuits. Retrieved in 2016, August 15, from http://www.digatron.com/fileadmin/ pdf/lead_acid.pdfeng
dc.source.bibliographicCitationMatson, N. E., & Piette, M. A. (2005). High performance commercial building systems: review of California and National Benchmarking Methods. Working Draft. Berkeley: United States Government. Retrieved in 2016, August 15, from https://www.semanticscholar.org/paper/ Review-of-California-and-National-Benchmarking- Piette-Lawrence/8c0a3ecbe7c21ddcb43625a2104e4 45136c2f009eng
dc.source.bibliographicCitationMiloloza, I. (2013). Tendencies of development of global battery market with emphasis on Republic of Croatia. Interdisciplinary Description of Complex Systems, 11(3), 318-333. http://dx.doi.org/10.7906/indecs.11.3.3.eng
dc.source.bibliographicCitationOspino-Castro, A. (2010). Análisis del potencial energético solar en la Región Caribe para el diseño de un sistema fotovoltaico. INGECUC, 6(6), 1-8. Retrieved in 2016, August 15, from http://revistascientificas.cuc.edu.co/ index.php/ingecuc/article/view/296spa
dc.source.bibliographicCitationPalamutcu, S. (2010). Electric energy consumption in the cotton textile processing stages. Energy, 35(7), 2945- 2952. http://dx.doi.org/10.1016/j.energy.2010.03.029.eng
dc.source.bibliographicCitationPavlov, D. (2011). Lead-acid batteries: science and technology: a handbook of lead-acid battery technology and its Influence on the product. Amsterdam: Elsevier.eng
dc.source.bibliographicCitationPosch, A., Brudermann, T., Braschel, N., & Gabriel, M. (2015). Strategic energy management in energy-intensive enterprises: a quantitative analysis of relevant factors in the Austrian paper and pulp industry. Journal of Cleaner Production, 90, 291-299. http://dx.doi.org/10.1016/j. jclepro.2014.11.044.eng
dc.source.bibliographicCitationProut, L. (1993). Aspects of lead/acid battery technology 4: plate formation. Journal of Power Sources, 41(1-2), 195- 219. http://dx.doi.org/10.1016/0378-7753(93)80038-Q.eng
dc.source.bibliographicCitationRantik, M. (1999). Life cycle assessment of five batteries for electric vehicles under different charging regimes (KFB-Meddelande, 28). Goteborg: KFB.eng
dc.source.bibliographicCitationReport Buyer Ltd. (2015). Global and China lead-acid battery industry report, 2015-2018. London. Retrieved in 2016, August 15, from http://www.prnewswire.com/ news-releases/global-and-china-lead-acid-batteryindustry- report-2015-2018-300200529.htmleng
dc.source.bibliographicCitationRudberg, M., Waldemarsson, M., & Lidestam, H. (2013). Strategic perspectives on energy management: a case study in the process industry. Applied Energy, 104, 487- 496. http://dx.doi.org/10.1016/j.apenergy.2012.11.027.eng
dc.source.bibliographicCitationRydh, C. J. (1999). Environmental assessment of vanadium redox and lead-acid batteries for stationary energy storage. Journal of Power Sources, 80(1-2), 21-29. http://dx.doi.org/10.1016/S0378-7753(98)00249-3.eng
dc.source.bibliographicCitationRydh, C. J., & Sandén, B. A. (2005). Energy analysis of batteries in photovoltaic systems. Part I: performance and energy requirements. Energy Conversion and Management, 46(11-12), 1957-1979. http://dx.doi. org/10.1016/j.enconman.2004.10.003.eng
dc.source.bibliographicCitationSaidur, R., Rahim, N. A., & Hasanuzzaman, M. (2010). A review on compressed-air energy use and energy savings. Renewable & Sustainable Energy Reviews, 14(4), 1135- 1153. http://dx.doi.org/10.1016/j.rser.2009.11.013.eng
dc.source.bibliographicCitationSiraki, A. G., & Pillay, P. (2012). An in situ efficiency estimation technique for induction machines working with unbalanced supplies. IEEE Transactions on Energy Conversion, 27(1), 85-95. http://dx.doi.org/10.1109/ TEC.2011.2168563.eng
dc.source.bibliographicCitationSoto, J., Borroto, A., Bah, M. A., González, R., Curbelo, M., & Díaz, A. M. (2014). Diseño y aplicación de un procedimiento para la planificación energética según la NC-ISO 50001: 2011. Ingeniería Energética, 35(1), 38-47.spa
dc.source.bibliographicCitationSousa, V., Hernández Herrera, H., Quispe, E. C., Viego, P. R., & Gómez, J. R. (2017). Harmonic distortion evaluation generated by PWM motor drives in electrical industrial systems. Iranian Journal of Electrical and Computer Engineering, 7(6), 3207-3216. http://dx.doi. org/10.11591/ijece.v7i6.pp3207-3216.eng
dc.source.bibliographicCitationSullivan, J. L., & Gaines, L. (2012). Status of life cycle inventories for batteries. Energy Conversion and Management, 58, 134-148. http://dx.doi.org/10.1016/j. enconman.2012.01.001.eng
dc.source.bibliographicCitationVine, E. (2005). An international survey of the energy service company ESCO industry. Energy Policy, 33(5), 691-704. http://dx.doi.org/10.1016/j.enpol.2003.09.014.eng
dc.source.bibliographicCitationWeinert, N., Chiotellis, S., & Seliger, G. (2011). Methodology for planning and operating energy-efficient production systems. CIRP Annals Manufacturing Technology, 60(1), 41-44. http://dx.doi.org/10.1016/j.cirp.2011.03.015.eng
dc.source.bibliographicCitationYanes, J. P. M., & Gaitan, O. G. (2005). Herramientas para la gestión energética empresarial. Sciences et Techniques, 3(29), 169-174.spa


Ficheros en el ítem

Thumbnail
Thumbnail

Este ítem aparece en la(s) siguiente(s) colección(ones)

  • Artículos [1351]
    Artículos científicos evaluados por pares

Mostrar el registro sencillo del ítem

Attribution-NonCommercial-NoDerivatives 4.0 Internacional
Excepto si se señala otra cosa, la licencia del ítem se describe como Attribution-NonCommercial-NoDerivatives 4.0 Internacional