Mostrar el registro sencillo del ítem

dc.rights.licenseLicencia de Creative Commons Reconocimiento-NoComercial-CompartirIgual 4.0 Internacionalspa
dc.contributor.authorGarcía-Díaz, J.Carlos
dc.contributor.authorPulido-Rojano, Alexander
dc.date.accessioned2018-03-02T14:31:15Z
dc.date.available2018-03-02T14:31:15Z
dc.date.issued2016-12-15
dc.identifier.issn00127353
dc.identifier.urihttp://hdl.handle.net/20.500.12442/1750
dc.description.abstractModified control charts are used to monitor and control manufacturing processes which are considered to be six-sigma processes. The use of these charts is based on the idea that the cost of identifying and correcting special causes is much higher than the cost of off-target products. Therefore, the process mean is essentially acceptable as long as it is anywhere within the specification limits. These concepts are applied to the packaging process in multihead weighers. The weight of the packed product, seen as the quality characteristic to be monitored, must be as close to a specified target weight as possible and comply with applicable regulations. The packaging process was previously optimized and improved using a packaging strategy, which was evaluated through a proposed packing algorithm. In this way, a set of numerical experiments were conducted to examine the solutions generated, which were subsequently monitored.eng
dc.description.abstractLos gráficos de control modificados se utilizan para el seguimiento y control de procesos de fabricación que son considerados como procesos seis-sigma. El uso de estos gráficos se basa en la idea de que el costo de identificar y corregir causas especiales de variación es mucho más alto que el costo de productos alejados de su valor nominal. Por lo tanto, la media del proceso es esencialmente aceptable siempre que esté dentro de los límites de especificación. Estos conceptos han sido aplicados al proceso de envasado en pesadoras multicabezal. El peso del producto envasado, visto como la característica de calidad a ser monitoreada, debe ser lo más cercano posible a un peso objetivo y cumplir con la normativa. El proceso ha sido previamente optimizado y mejorado mediante una estrategia de envasado, la cual es evaluada a través de un algoritmo de envasado. De esta manera, un conjunto de experimentos numéricos fueron realizados para examinar las soluciones generadas, las cuales son posteriormente monitoreadas.spa
dc.language.isoengspa
dc.publisherUniversidad Nacional de Colombia (Sede Medellín)spa
dc.sourceRevista DYNAspa
dc.sourceVol. 84, No.200 (2017)spa
dc.source.uriDOI: http://dx.doi.org/10.15446/dyna.v84n200.58518
dc.subjectQuality controleng
dc.subjectModified control charteng
dc.subjectReduction of variabilityeng
dc.subjectCombinatorial optimizationeng
dc.subjectPackaging processeng
dc.subjectMultihead weigherseng
dc.subjectControl de calidadspa
dc.subjectGráfico de control modificadospa
dc.subjectReducción de la variabilidadspa
dc.subjectOptimización combinatoriaspa
dc.subjectProceso de envasadospa
dc.subjectPesadores multicabezalspa
dc.titleMonitoring and control of the multihead weighing process through a modified control chart1eng
dc.typearticlespa
dcterms.referencesPulido-Rojano, A., Methodological design for the prevention of risk in production processes, DYNA, 82(193), pp. 16-22, 2015. DOI: 10.15446/dyna.v82n193.42903eng
dcterms.referencesDuncan, A.J., Quality control and industrial statistics. Illinois: Irwin, 1986.eng
dcterms.referencesMontgomery, D.C., Statistical Quality Control. New York: John Wiley & Sons, 2009.eng
dcterms.referencesGrant, E.L. and Leavenworth, R., Statistical Quality Control. New York: McGraw-Hill, 1996.eng
dcterms.referencesKeraita, J.N. and Kim, K.H., A weighing algorithm for multihead weighers, International Journal of Precision Engineering and Manufacturing, 8(1), pp. 21-26, 2007.eng
dcterms.referencesPulido-Rojano, A. and García-Díaz, J.C., Optimization of multihead weighing process using the Taguchi loss function, Proceedings of IIE International 8th International Conference on Industrial Engineering and Industrial Management and XX International Conference on Industrial Engineering and Operations Management, 2014. pp. 305-312.eng
dcterms.referencesKeraita, J.N. and Kim, K.H., A study on the optimum scheme for determination of operation time of line feeders in automatic combination weighers, Journal of Mechanical Science and Technology, 20(10), pp. 1567-1575, 2006. DOI: 10.1007/BF02916261eng
dcterms.referencesKaruno, Y., Nagamochi, H. and Wang, X., Bi-criteria food packing by dynamic programming, Journal of the Operations Research Society of Japan, 50(4), pp. 376-389, 2007.eng
dcterms.referencesPulido-Rojano, A., García-Díaz, J.C., Giner-Bosch, V., A multiobjective approach for optimization of the multihead weighing process. In: Framinan, J.M., Perez, P., Artiba, A., (eds). The road ahead: Understanding challenges and grasping opportunities in industrial and systems engineering, Spain, IEEE, 2015. 67. DOI: 10.1109/IESM.2015.7380192.eng
dcterms.referencesGarey, M.R. and Johnson, D.S., Computers and Intractability: A guide to the theory of NP-completeness. New York: WH Freeman and Company, 1979.eng
dcterms.referencesImahori, S., Karuno, Y., Nagamochi, H. and Wang, X., Kansei engineering humans and computers: Efficient dynamic programming algorithms for combinatorial food packing problems, International Journal of Biometrics, 3(3), pp. 228-245, 2011. DOI: 10.1504/IJBM.2011.040817eng
dcterms.referencesSalicrú, M., González, C. and Barreiro, J.J., Variability reduction with multiweighing proceedings, Top, 4(2), pp. 319-329, 1996. DOI: 10.1007/BF02568515eng
dcterms.referencesBarreiro, J.J., González, C. and Salicrú, M., Optimization of multiweighing packing proceeding, Top, 6(1), pp. 37-44, 1998. DOI: 10.1007/BF02564797eng
dcterms.referencesImahori, S., Karuno, Y., Nishizaki, R. and Yoshimoto, Y., Duplex and quasi-duplex operations in automated food packing systems, Proceedings of IEEE/SICE International Symposium on System Integration (SII), 2012. pp. 810-815. DOI: 10.1109/sii.2012.6427267eng
dcterms.referencesKaruno, Y., Takahashi, K. and Yamada, A., Dynamic programming algorithms with data rounding for combinatorial food packing problems, Journal of Advanced Mechanical Design, System, and Manufacturing, 7(2), pp. 233-243, 2013. DOI: 10.1299/jamdsm.7.233eng
dcterms.referencesKaruno, Y. and Tateishi, K., Improved heuristics with data rounding for combinatorial food packing problems, Proceedings of IEEE 2014 7th international conference on service-oriented computing and applications, 2014, pp. 81-88. DOI: 10.1109/soca.2014.15eng
dcterms.referencesKaruno, Y., Nagamochi, H. and Wang, X., Optimization problems and algorithms in double-layered food packing systems, Journal of Advanced Mechanical Design, System and Manufacturing, 4(3), pp. 605-615, 2010. DOI: 10.1299/jamdsm.4.605eng
dc.rights.accessrightsinfo:eu-repo/semantics/openAccess


Ficheros en el ítem

Thumbnail

Este ítem aparece en la(s) siguiente(s) colección(ones)

  • Artículos [1351]
    Artículos científicos evaluados por pares

Mostrar el registro sencillo del ítem